Multi-cavity plastic connector injection mold
|Payment Type:||T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
Model No.: PFMOLD
This tool incorporates an 8 drop hot runner system, direct fed on to each part with a valve gate. The hydraulic locking cylinders are utilised with a specific opening sequence to minimise distortion of the part. Mouldings are then ejected via pins.
Dimensions:596 x 503 x 480mm
|Place of Origin:|| |
|Brand Name:|| |
|Shaping Mode:|| |
Plastic Injection Mould
|Mold Material:|| |
|Part Name:|| |
|Mold base:|| |
|Mold Cavity:|| |
|Mold life:|| |
1 million shots
|Part material:|| |
8 drop hot runner
Our process can be summarized in a few basic steps:
1.Assessment of your need.
2.Recommendation and proposal.
4.Design of your mold with multiple consultations.
5.Transfer of design specs to machining software.
6.Creation of mold.
7.Prototyping parts and your inspection.
9.Delivery of mold.
10.Throughout the process, we pay excruciating attention to detail, and offer service second to none.
Packaging & Delivery
plastic mould: Good Quality Carton Packing,Suitable for the export
In 15--30 days upon receipt of the deposit
Why Choose Us? 1.What is your standard design lead time?
Our design lead time is 3-4 days for initial 2D design, then 3-4 days for 3D design upon approval of 2D design.
2.What is your standard quote lead time?
Quotes are provided 8-24 hours from receipt of RFQ.
3.What is your common lead time?
Our common lead time from design approval to T1 sampling is 4-7 weeks, depending on mold requirements and part complexity.
4.What are your standard payment terms for tooling?
We request a 50% deposit with your order. 30% payment is due after T1 samples and the 20% balance before ship the mold. The freight amount will be invoiced in full after T1 sampling, and is payable prior to mold shipment.
5.What are your standard payment terms for molding?
Standard terms for molding are a 50% deposit with order and the 50% balance is due prior to product shipment, including all freight costs.
6.What is your standard warranty for tooling
PF Mold warrants the quality, workmanship and materials used in producing molds for a period of 180 days or 250,000 cycles, whichever occurs first, from the date of delivery of the mold(s) to the customer. PF Mold will, at its sole discretion, repair or replace all parts determined to be defective as to quality, workmanship or materials. Warranty of parts replacement or repairs, shall, at the sole discretion of PF Mold, be provided (a) at PF Mold`s factory,( 54807072,b) by an independent repair shop hired by PF Mold, or (c) by the customer and invoiced to PF Mold. The customer is solely responsible for mold design, design specifications and design approval. No warranty is provided concerning the design of the mold. Any failure of the mold or any mold components arising from or related to design is not warranted.
7.What is your standard warranty for molding?
PF Mold warrants the molded products it produces to client design specifications to be free of defects in quality, workmanship and materials for a period of twelve months from the shipment date and will, at its sole discretion, repair or replace products determined to be defective. This warranty shall not apply to breakage caused by product misuse. PF Mold does not warrant the customer design or product defects or failure arising from customer design or design-related issues.
8.Are factory visits encouraged?
Yes, we welcome customers to visit our facility and we will work with customers to assist in obtaining the necessary Visa paperwork, travel plans, accommodations, etc.
9.Can you review our application at our facilities?
Yes, our technical staff is available for full technical project review at your facility to discuss your applications, part design, mold designs, and production requirements.
10.Do you handle freight of molds and molded products?
Door to door freight of molds or molded products going to your country is managed and fully insured through our company. Freight is provided in the quotation and includes all Customs duties and taxes. All other destinations are handled by PF Mold and freight arrangements can be made per your requirements.
11.Do you use inch or metric components?
All mold components for our customers are made using standard inch or metric components via the requirement, unless otherwise specified by customer.
PF Mold Co., Limited was established in 2006 in Shenzhen, China. It bases on supplying injection molding manufacturing and injection moulded plastic (O.E.M) Services.
Our Team uses international advanced CAD/CAM/CAE design methods and the integrated manufacturing system.
We are equipped with more than 30 injection moulding manufacturing machines, including CNC machines, Digital-control EMDs and EWCs for an injection mould fabrication. As well as over 40 Digital-controlled plastic molding making machines for molded parts production. We are capable of providing a full range of service from product design & manufacturing to assembly & worldwide fast delivery.
As a China plastic moulding factory, our injection moulds and injection moulded plastic are widely used in auto accessories, Electronics, household appliances, medical devices, game players, and computer displays fields.
Our main overseas markets are in United States; Canada; European Union; Mexico; Brazil; Japan; Korea; Singapore; Middle East; Australia. Currently we have built long-term supplying business cooperation with more than 50 companies in more than 20 countries.
- Company Name: PF Mold Co., Ltd.
- Representative: Peter Jia
- Product/Service: Injection Mold , Plastic Molding , Die Casting Mold , China Mold Maker , Plastic Mould , Precision Mold
- Capital (Million US $): 1000,000RMB
- Year Established: 2006
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 2
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: No.49,Jinkang road, Kengzi, Pingshan,shenzhen,China
- Contact Person: Mr. Peter Jia
- Tel: 86-755-28326655
Premium Related Products